T-6500 vs. T-11500 OmniCube: Reflective Sheeting for Parking Signs

Parking signs are typically fabricated in white reflective background sheeting. Avery Dennison’s T-11500 OmniCube delivers roughly 61% brighter minimum retroreflectivity than the standard-grade T-6500, using full-cube prism technology instead of truncated microprisms.

T-11500 OmniCube: 580 cd/fc/ft² vs. T-6500: 360 cd/fc/ft² (ASTM D4956, white, 0.2° observation / -4° entrance angle — see table below for full detail).

Comparison of Avery Dennison T-6500 HIP and T-11500 OmniCube white reflective sheeting specifications
Specification Close-up of Avery Dennison T-6500 microprismatic reflective sheeting texture, white T-6500 White Close-up of Avery Dennison T-11500 OmniCube full-cube prismatic reflective sheeting texture, white T-11500 OmniCube White
ASTM D4956 Type Type III/IV Type IX, XI
Prism Technology Microprismatic (truncated) Full-cube — 50%+ more efficient
Min. Retroreflectivity
(0.2° obs / -4° entrance)
360 cd/fc/ft² 580 cd/fc/ft²
Min. Retroreflectivity
(0.2° obs / +30° entrance)
170 cd/fc/ft² 220 cd/fc/ft²
Durability Up to 10 years, vertical exposure only Up to 12 years
Sheeting Manufacturer Warranty (RA Retained) 80% through year 10 80% years 1–7, 70% years 8–12
Best For Standard parking & regulatory signage, cost-sensitive projects High-traffic lots, garages, low-light areas, night visibility priority

Warranty terms are issued by Avery Dennison on the reflective sheeting material itself, per manufacturer conditions, and are separate from any warranty on the fabricated sign.

What is the difference between T-6500 and T-11500 OmniCube white reflective sheeting?

T-6500 is ASTM D4956 Type III/IV microprismatic sheeting with a minimum retroreflectivity of 360 cd/fc/ft2 (white, 0.2 degree observation / -4 degree entrance) and up to 10 years durability. T-11500 OmniCube is ASTM D4956 Type IX/XI full-cube sheeting with a minimum retroreflectivity of 580 cd/fc/ft2 under the same conditions, up to 12 years durability, and full-cube prisms that are over 50% more efficient than traditional truncated prisms.

Which sheeting should I choose for a parking sign?

T-6500 White meets ASTM Type III/IV and is the standard, cost-effective choice for most parking lots. T-11500 OmniCube White meets the higher ASTM Type IX/XI standard and is worth the upgrade for parking garages, poorly lit lots, or facilities that want maximum nighttime visibility and a longer service life.

Links to Parking Signs

Both finishes are available on every parking sign we make, including the Handicap Parking Signs, No Parking Signs, No Parking Fire Lane Signs and all of our other Parking Signs

Additional Resources

888-728-7665 CONTACT US
All products Request a Quote Request a Quote