Post to Post Surface Mount Breakaway Coupler for Square Sign Posts

SKU# S-PPC
Quantity | Price Each |
---|---|
1 to 5: | $126.00 |
6 to 24: | $119.70 |
25 + | $107.10 |
In Stock - Usually ships same or next business day.
The post to post coupler is made of grey cast iron and is designed for 2 inch square posts. Great for high traffic areas. Reduces risk of injury during collision and meets Federal Highway Administration standards for use on the National Highway System.
Details for Post to Post Surface Mount Breakaway Coupler for Square Sign Posts:
This breakaway coupler connects a 2"x2" square base post (buried in the ground) to a 2"x2" square sign post. The coupler is made of cast iron.
![]() r-spc | ![]() s-spc | ![]() u-spc |
![]() s-ppc | ![]() u-ppc | |
Installation
1: Choose location for for the in-ground anchor post
2: Drive post into ground, leaving three holes visible
3: Check straightness and ensure post is level
4: Insert larger end of anchor into post
5: Attach anchor to bottom post with two red corner bolts in the 1st and 3rd holes
6: Corner bolts must be installed on the same side
7: Secure with washer and nut
8: Place 2 inch square post on anchor
9: Secure using silver corner bolts
10: Place washer and nut on other end and tighten
1: Choose location for for the in-ground anchor post
2: Drive post into ground, leaving three holes visible
3: Check straightness and ensure post is level
4: Insert larger end of anchor into post
5: Attach anchor to bottom post with two red corner bolts in the 1st and 3rd holes
6: Corner bolts must be installed on the same side
7: Secure with washer and nut
8: Place 2 inch square post on anchor
9: Secure using silver corner bolts
10: Place washer and nut on other end and tighten
Post to Post Surface Mount Breakaway Coupler for Square Sign Posts Specifications:
SKU #: |
S-PPC |
Weight: |
3 lbs |
Dimensions: |
3 Inches x 3 Inches x 8 Inches |
Product Color: |
Silver |