Home > Sign Posts and Hardware > Specialty Hardware for Street Name Signs

16.5" Wing Bracket

SKU# H-265

Quantity	Price Each
1 to 5:	$19.45
6 to 24:	$18.48
25 +	$16.53

In Stock - Usually ships same or next business day.

The cast aluminum wing support bracket can be used for flat or extruded blade street name signs. It can be mounted on round light posts, utility poles, or square posts with bolts or strapping. Individual (H-121) and bulk strapping (H-S2075) can be bought for installation. Vandal resistant set screws can also be bought along with the vandal hardware wrench (H-V1 and H-501).

The bracket has the option of 16.5” and 24” support arms for the bottom of the sign, and can be used for signs from 6” to 9” tall. The bracket uses vandal-resistant zinc-plated steel set screws that require a special allen wrench.

Details for 16.5" Wing Bracket:

Works with flat or extruded street name blades.
Bracket is 8" tall.
Includes (2) set screws for holding sign.

The 16.5" wing bracket is ideal for medium sized street name blades. This bracket can be mounted to a pole using our H-121 stainless straps, or the wing bracket can also be mounted to a wall.

h-365	h-265	h-280
h-290	h-255	h-150
h-s1500	h-270	h-s1505

Installation

Tools needed:
Allen wrench

Square Post Installation
place bracket at desired height
align bracket holes to holes on square post
Put bolts through holes and secure
Place sign on bracket and tighten set screws with allen wrench

Round Post Installation
place bracket at desired height
Place strapping over the the grooves in the bracket— using either two or three for desired security
To create a loop around your desired object, feed the strap through the ‘mouth’ at the end of the strap where the slim screw is
To adjust, make sure the slim screw is pointing straight away from the strap, then push or pull the strap according to desired tightness
To secure, push screw flat to strap
Tighten with 5/16” socket
Note: you will feel screw ‘bite' into strap and pull it tight as you turn
the screw